Simulation Upper Bound Theorem to Prediction Extrusion Load

摘要

A metal extrusion was process that extrusion puncture perforate surface of material to throw and flow across outlet of die. This operation was a complex process in extrusion while penetration occurred at same time. This process can be seen in many production operations, like in forming of making portion of metal strip, and forming of extruded portion in a complex fine blanking with extrusion operation. Also exhibit the operation properties and give the method of numerical solution. So increasing load to 610KN with increased friction factor to 0.7 and increased with increasing the reduction ratio and stroke of operation. For the results and mesh distortion, with allocations of strains may be predicted. Analyzing results was submitted of metal extruded may be classified into two zones for the different lineaments deformation, moreover, energy in the zones of deformation may be classified into two parts for their different lineaments of internal zone and contact zone with the die. Fracture location has been found from simulations.