...
首页> 外文期刊>Materials Science and Engineering >Effect of minor addition of vanadium on mechanical properties and microstructures of as-extruded near eutectic Al-Si-Mg alloy
【24h】

Effect of minor addition of vanadium on mechanical properties and microstructures of as-extruded near eutectic Al-Si-Mg alloy

机译:微量添加钒对挤压近共晶Al-Si-Mg合金力学性能和组织的影响

获取原文
获取原文并翻译 | 示例

摘要

Mechanical properties of near eutectic Al-12.5 wt%Si-0.6 wt%Mg alloys with and without addition of V were tested. Results show that addition of 0.1 wt% V only has a minor influence on the tensile properties of near eutectic Al-Si-Mg alloy in as-cast and as-homogenized conditions. However, it can significantly improve the tensile properties in as-extruded condition. The YS is enhanced nearly 50% and the elongation can reach 14%. Three factors that may contribute to the enhancement of YS were analyzed by EBSD, XRD and TEM investigation, i.e. △σ_(gb) (the strengthening from (sub-) grain boundaries), M (Taylor factor) and τ_(tot) (critical resolved shear stress). Results show that the higher τ_(tot) in the alloy with V addition is the main contributor to the higher YS. According to the TEM observation and EDX analysis, the fine precipitates contributed to the higher τ_(tot) in 4~# alloy are quaternary AlFeVSi phases.
机译:测试了添加和不添加V的接近共晶Al-12.5 wt%Si-0.6 wt%Mg合金的机械性能。结果表明,添加0.1 wt%的V仅对铸态和均质化条件下的近共晶Al-Si-Mg合金的拉伸性能产生较小的影响。但是,它可以显着改善挤出条件下的拉伸性能。 YS提高了近50%,伸长率可以达到14%。通过EBSD,XRD和TEM研究分析了可能有助于提高YS的三个因素,即△σ_(gb)(从(亚)晶界的强化),M(泰勒系数)和τ_(tot)(关键解析剪切应力)。结果表明,添加V的合金中较高的τ_(tot)是造成较高YS的主要因素。根据TEM观察和EDX分析,在4〜#合金中,细小的析出物是较高的τ_(tot)的四元AlFeVSi相。

著录项

  • 来源
    《Materials Science and Engineering》 |2014年第25期|41-48|共8页
  • 作者单位

    School of Materials Science and Engineering, Southeast University, Jiangsu Key Laboratory for Advanced Metallic Materials, Nanjing 211189, China;

    School of Materials Science and Engineering, Southeast University, Jiangsu Key Laboratory for Advanced Metallic Materials, Nanjing 211189, China;

    School of Materials Science and Engineering, Southeast University, Jiangsu Key Laboratory for Advanced Metallic Materials, Nanjing 211189, China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Aluminum alloys; Thermomechanical processing; Mechanical characterization;

    机译:铝合金;热机械加工;机械特性;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号