首页> 外文期刊>Materials Science and Engineering >Deformation nanotwins in coarse-grained aluminum alloy at ambient temperature and low strain rate
【24h】

Deformation nanotwins in coarse-grained aluminum alloy at ambient temperature and low strain rate

机译:常温低应变率下粗晶粒铝合金中的形变纳米孪晶

获取原文
获取原文并翻译 | 示例
           

摘要

In order to reveal the possible occurrence of deformation twins in coarse-grained aluminum/aluminum alloy at normal experimental conditions, a 5A02-O aluminum alloy with coarse grains was compressed quasi-statically to various plastic strains at ambient temperature, followed by high-resolution transmission electron analysis. The results revealed some long streaks produced by the thin plate-like structure with 2 atomic planes thick in the specimen undergoing a large strain, while under a relatively small plastic strain, the striped characteristics disappeared. The fast Fourier transform and theoretical analysis have shown that these long streaks are nanotwins, derived from the overlapping of stacking fault ribbons formed by Shockley partial dislocation on adjacent slip planes, which are triggered by the large plastic strain.
机译:为了揭示在正常实验条件下粗晶粒铝/铝合金中可能出现形变孪晶,将具有粗大晶粒的5A02-O铝合金在环境温度下准静态压缩为各种塑性应变,然后进行高分辨率透射电子分析。结果表明,试样中具有2个原子面厚的薄板状结构产生了一些长条形,该条形体经受了较大的应变,而在相对较小的塑性应变下,条纹特征消失了。快速傅里叶变换和理论分析表明,这些长条形是纳米孪晶,源自肖克利局部错位在相邻滑移面上形成的堆叠断层带的重叠,这是由大塑性应变触发的。

著录项

  • 来源
    《Materials Science and Engineering》 |2015年第5期|272-276|共5页
  • 作者单位

    State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, 430074 Wuhan, PR China;

    State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, 430074 Wuhan, PR China;

    State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, 430074 Wuhan, PR China;

    State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, 430074 Wuhan, PR China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Aluminum alloys; Electron microscopy; Dislocations; Twinning;

    机译:铝合金;电子显微镜;脱位;结对;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号