Creep behavior of subzones in a CrMoV weldment characterized by the in- situ creep test with miniature specimens

摘要

The local creep properties of a CrMoV weldment were acquired by using miniature specimens of in-situ creep test. The creep performances of heat-affected zone (HAZ), weld pass metal in the welding direction (WP) and multiple weld passes through the thickness direction (MWP) were compared with each other. It is shown that the magnitudes of creep strength order satisfy WP > MWP > HAZ, while the creep ductility of these three samples exhibit an inverse order: WP < MWP < HAZ. In addition, the typical three-stage creep deformation curves are observed in both WP and MWP samples. However, no significant difference between the primary and the secondary stages is detected for HAZ sample.