首页> 外文期刊>Materials Letters >Preparation of tungsten carbide porous sphere core wrapped by porous multiwall
【24h】

Preparation of tungsten carbide porous sphere core wrapped by porous multiwall

机译:多孔多壁包裹的碳化钨多孔球芯的制备

获取原文
获取原文并翻译 | 示例
       

摘要

Tungsten carbide porous sphere core wrapped by porous multiwall was prepared by spray drying sphere miniaturation—gas-solid reaction, used ammonium metatungstate as precursors, hydrogen and methane as reduction and carbonization atmosphere. The sample was characterized by SEM, XRD and BET, respectively. The SEM results show that the sample is constituted by two parts, a core with porosity and porous multiwall, and the wall is made up of a lot of nanoscale particles. The XRD results show that the crystal phase of the sample is tungsten carbide (WC) only, and the average size of the WC crystal estimated according to XRD data is around 14 nm. The BET specific area of the sample is 10.2834 m~2/g.
机译:通过喷雾干燥球的小型化—气固反应,以偏钨酸铵为前驱体,氢气和甲烷为还原气氛和碳化气氛,制备了包裹有多孔多壁的碳化钨多孔球核。样品分别用SEM,XRD和BET表征。扫描电镜结果表明,样品由两部分组成:有孔的核和多孔的多壁,壁由许多纳米级颗粒组成。 XRD结果表明,样品的晶相仅为碳化钨(WC),根据XRD数据估算的WC晶体的平均尺寸约为14 nm。样品的BET比表面积为10.2834m 2 / g。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号