...
首页> 外文期刊>Materials Letters >Synthesis and characterization of PB(ZR_(0.52), TI_(0.48))O_3 nanoflbers by electrospinning, and dielectric properties of PZT-Resin composite
【24h】

Synthesis and characterization of PB(ZR_(0.52), TI_(0.48))O_3 nanoflbers by electrospinning, and dielectric properties of PZT-Resin composite

机译:PB(ZR_(0.52),TI_(0.48))O_3纳米纤维的电纺合成,表征及PZT-树脂复合材料的介电性能

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Lead zirconate titanate (PZT) / Poly vinil pyrolidone (PVP) nanofibers were spun from spinnable solution by electrospinning method. Zirconium n-propoxide, Titanium isopropoxide and Lead acetate trihydrate were solved in 2-Metoxy ethanol to obtain a precursor solution with a suitable viscosity. The obtained mats were calcined at 550, 600, 650, 700 and 800 ℃ for 2 h. The morphology and crystalline phase of PZT nanofibers were characterized using X-ray diffraction (XRD) and Scanning electron microscopy (SEM). XRD spectra indicated the formation of perovskite Pb(Zr_(0.52), TI_(0.48))O_3 phase at 600 ℃. Fibers had diameters between 50 to 500 nm by controlling of the process parameters. Aging time and PVP percentage were found to have a significant influence on the nanofibers morphology. Increasing PVP and aging lead to increased viscosity and a correlated increase in green fiber diameter. The dielectric constant of PZT nanofibers were measured at 1 kHz.
机译:钛酸锆钛酸铅(PZT)/聚乙烯吡咯烷酮(PVP)纳米纤维是通过静电纺丝法从可纺溶液中纺出的。将正丙醇锆,异丙醇钛和三水合乙酸铅溶解在2-甲氧基乙醇中,以获得具有合适粘度的前体溶液。将获得的垫在550、600、650、700和800℃下煅烧2小时。使用X射线衍射(XRD)和扫描电子显微镜(SEM)表征了PZT纳米纤维的形态和晶相。 X射线衍射光谱表明600℃时钙钛矿Pb(Zr_(0.52),TI_(0.48))O_3相的形成。通过控制工艺参数,纤维的直径在50至500nm之间。发现老化时间和PVP百分比对纳米纤维的形态具有显着影响。 PVP的增加和老化会导致粘度增加,并且生纤维直径也会相应增加。在1 kHz下测量PZT纳米纤维的介电常数。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号