首页> 外文期刊>Materials Letters >The effect of post-sintering annealing on the erosion resistance of infiltrated W-Cu composites
【24h】

The effect of post-sintering annealing on the erosion resistance of infiltrated W-Cu composites

机译:烧结后退火对浸渗钨铜复合材料耐蚀性的影响

获取原文
获取原文并翻译 | 示例
           

摘要

In this work, the effect of vacuum annealing on the erosion resistance of infiltrated W-10wt% Cu composite against the impact of alumina droplets at 3000 degrees C, was studied. SEM images were employed to identify the microstructure evolution. The obtained results indicated that the post-sintering annealing reduced erosion rate from 19.7% to 11.2%. (c) 2017 Published by Elsevier B.V.
机译:在这项工作中,研究了真空退火对渗透的W-10wt%Cu复合材料在3000摄氏度下抵抗氧化铝液滴冲击的耐蚀性的影响。 SEM图像被用于识别微观结构演变。所得结果表明,烧结后退火将腐蚀率从19.7%降低到11.2%。 (c)2017年由Elsevier B.V.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号