Investigation on Mechanical and AE Characteristics of Yellow Sandstone Undergoing Wetting-Drying Cycles

摘要

The cyclic wetting-drying phenomenon is a complicated physical and chemical process. This kind of process will weaken the properties of rock to some extent. Some fundamental physical parameters of sandstone were first tested to study the weakening influence of wetting-drying cycles on the physical characteristics. Then, the water weakening effect on the mechanical and acoustic emission (AE) characteristics of rock on account of wetting-drying cycles was experimentally studied. Laboratory test results showed that when the number of cycles increased from 0 to 25, the density, P-wave velocity, uniaxial compressive strength (UCS), (elastic modulus (E)) and total AE counts of the rock specimens continuously decreased. However, the water absorption would increase as the number of cycles increased. The functional relationships between the total AE counts and the mechanical parameters (UCS and f) of sandstone after each cyclic number were established based on the test results. In addition, the chemical components and microstructure variations of rock undergoing wetting-drying cycles were examined. From the results, it can be concluded that microcrack growth and expansion inside the rocks undergoing wetting-drying cycles are the main reasons for the attenuation of the rock properties. Moreover, with increasing loading rate, the UCS, E and total AE counts of sandstone after each cyclic number would increase.