...
首页> 外文期刊>The Korean journal of chemical engineering >A selective catalyst for methanol conversion into light olefin with a high propylene to ethylene ratio
【24h】

A selective catalyst for methanol conversion into light olefin with a high propylene to ethylene ratio

机译:用于高丙烯对乙烯比率的甲醇转化为轻烯烃的选择性催化剂

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

MSU-S catalyst, assembled from ZSM-5 zeolite seed (MFI), was synthesized with silica to alumina ratio 55 and characterized by XRD, NH3-TPD, BET and FT-IR techniques. It was tested in a vertical fixed bed reactor for selective production of light olefins from methanol (MTO) at temperatures of 400, 450 and 500 A degrees C and WHSV of 1, 5 and 25 h(-1). After thorough investigation, it was found that WHSV=5 h(-1) and temperature of 500 A degrees C are the optimum conditions for maximum light olefin yield, which was 52% with propylene to ethylene ratio of 4.57. Acidity of MSU-S was promoted by incorporation of phosphotungusticacid (HPW) and a direct method to reach high HPW dispersion and thermal stability. Maximum light olefin yield was observed over HPW-MSU-S at the optimum reaction conditions to be nearly 60% with propylene to ethylene ratio of 4.3.
机译:由ZSM-5沸石晶种(MFI)组装而成的MSU-S催化剂,其二氧化硅与氧化铝的比例为55,并通过XRD,NH3-TPD,BET和FT-IR技术进行了表征。它在立式固定床反应器中进行了测试,可以在400、450和500 A的温度和1,5和25 h(-1)的WHSV下从甲醇(MTO)选择性生产轻质烯烃。经过深入研究,发现WHSV = 5 h(-1)和500 A摄氏度的温度是最大轻烯烃收率的最佳条件,在丙烯与乙烯之比为4.57的情况下,轻烃的最大收率为52%。 MSU-S的酸度通过加入磷酸金门甲酸(HPW)和直接获得高HPW分散性和热稳定性的方法而得到提高。在最佳反应条件下,通过HPW-MSU-S观察到最大轻质烯烃收率接近60%,丙烯与乙烯之比为4.3。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号