首页> 外文期刊>Key Engineering Materials >< 001 > Textured Pb(Mg_(1/3)Nb_(2/3))O_3-PbTiO_3 Ceramics Prepared by Reactive Templated Grain Growth
【24h】

< 001 > Textured Pb(Mg_(1/3)Nb_(2/3))O_3-PbTiO_3 Ceramics Prepared by Reactive Templated Grain Growth

机译:<001>活性模板生长法制备有织纹的Pb(Mg_(1/3)Nb_(2/3))O_3-PbTiO_3陶瓷

获取原文
获取原文并翻译 | 示例
           

摘要

< 001 > textured Pb(Mg_(1/3)Nb_(2/3))O_3-0.325PbTiO_3 (PMN-32.5PT) ceramics were prepared by reactive templated grain growth (RTGG). Plate-liked {001}-SrTiO_3 single crystal particles were used as template seeds. MgNb_2O_6, TiO_2, PbO were mixed with SrTiO_3 templates as a reactive matrix. SrTiO_3 templates were oriented after tape-casting. The textured PMN-32.5PT ceramics were produced after heat treatment. In preparing textured PMN-32.5PT, RTGG was more efficient than TGG because of the chemical energy released in reaction. The final texture degree was very sensitive to the sintering history. An initial anneal step below the melting point of PbO resulted in better development of texture.
机译:<001>通过反应性模板生长(RTGG)制备织构化的Pb(Mg_(1/3)Nb_(2/3))O_3-0.325PbTiO_3(PMN-32.5PT)陶瓷。板状的{001} -SrTiO_3单晶颗粒用作模板种子。将MgNb_2O_6,TiO_2,PbO与SrTiO_3模板混合作为反应基质。铸造后将SrTiO_3模板定向。热处理后生产出带纹理的PMN-32.5PT陶瓷。在制备带纹理的PMN-32.5PT中,由于反应中释放出的化学能,RTGG比TGG更有效。最终的织构度对烧结历史非常敏感。低于PbO熔点的初始退火步骤可改善织构。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号