Effect of Evotherm-M1 on Properties of Asphaltic Materials Used at NAPMRC Testing Facility

摘要

Rheological properties of asphalt binders significantly affect distress development and performance of asphalt concrete materials. This article presents the effect of Evotherm-M1 modifications on rheological properties of asphalt binders used in the construction of test sections at the Federal Aviation Administration’s National Airport Pavement & Materials Research Center. Four different binders (i.e., polymer styrene butadiene styrene [SBS]-modified PG 76-22, PG 64-22, SBS-modified PG 76-22 plus Evotherm-M1, and PG 64-22 plus Evotherm-M1) are studied. Multiple stress creep recovery (MSCR) and strain-controlled frequency sweep (FS) test results are analyzed to construct the master curves for the binders. Results indicate high sensitivity of SBS-modified PG 76-22 to Evotherm-M1 modifications as compared with PG 64-22. Subsequently, the results of dynamic modulus tests conducted on asphalt mixture specimens (prepared using job mix formula and different binders) are analyzed to investigate the effect of binder type and modification on rheological properties and rutting performance of asphalt mixtures. It is shown that the rutting resistance and rheological properties of asphalt mixtures can be ranked based on the results of MSCR and FS tests conducted on asphalt binders. It is shown that the rutting resistivity of traffic test sections and lab-tested asphalt mixtures can be ranked as follows: SBS-modified PG 76-22, SBS-modified PG 76-22 plus Evotherm-M1, PG 64- 22, and PG 64-22 plus Evotherm-M1. This is consistent with the results obtained for tested asphalt binders.