Design of Angle Columns with Locally Unstable Legs

摘要

The paper addresses the design of angle section columns whose legs are slender and thus subject to local buckling in their ultimate limit state. For such slender angle sections, the local buckling mode is identical to the torsional mode and traditional design procedures become excessively conservative because they account for the torsional (local) buckling mode twice. The paper describes design methods for slender equal-leg angles which ignore torsion in determining the overall buckling stress and use recently presented effective width equations to accurately determine the bending capacity of angle sections, as required in the beam-column design approach. The shift in the effective centrol resulting from local buckling is determined from the actual stress distribution, as obtained using Stowell's classical solution, rather than the effective cross section. The columns are assumed to be simply supported and thus allowed to rotate about their principal axes.