Modal Frequencies of a Reinforced Timber-Concrete Composite Floor: Testing and Modeling

摘要

The reinforcement of a timber floor with a concrete layer properly connected to produce a composite system represents not only an improvement in the stiffness but also a foreseeable change in the modal frequencies of the floor. In order to assess that change, a typical timber floor, which was subsequently reinforced with a concrete layer to produce a composite, was tested at both stages in the research reported in this paper. Additionally, composite beams taken from the original floor were also tested. The results showed a significant decrease (44%) in the fundamental frequency after the reinforcement. In order to obtain the mode shapes and frequencies of the floor, finite-element (FE) models of the floors and beams were created. The FE models accurately matched the experimental results. Having validated the model, a parametric study was carried out to compare the results provided by the proposed FE model with a numerical model from the bibliography and to understand the influence of the most relevant structural parameters on the fundamental frequency of the composite floor. (C) 2015 American Society of Civil Engineers.