An Experimental Examination of the 2D+T Approximation

摘要

Measurements of contact line height and longitudinal wave profiles from experiments with a three-dimensional naval ship model and experiments using a 2D+T wave maker with motions approximating the three-dimensional hull form are compared. The shape and maximum height of the contact line in the bow region are nearly the same in the two experiments, and the distance downstream along the hull over which the two measurements agree increases with increasing Froude number, F_n = U_m/√(gL_m), where U_m is the ship model speed, g is the acceleration of gravity, and L_m is the ship mode! waterline length. The comparison of the longitudinal wave profile (wave cut) data from the two experiments shows fairly good agreement for wavelengths and amplitudes at the highest Froude number and the measurement position closest to the hull.