首页> 外文期刊>Journal of Membrane Science >Impact of thermal ageing on sorption and diffusion properties of PTMSP
【24h】

Impact of thermal ageing on sorption and diffusion properties of PTMSP

机译:热老化对PTMSP吸附和扩散性能的影响

获取原文
获取原文并翻译 | 示例
       

摘要

Gas and vapour permeability in both freshly cast and aged poly(1-trimethylsilyl-1-propyne) (PTMSP) membranes were investigated in terms of solubility and diffusion coefficients for two probe molecules, a permanent gas (nitrogen) and an organic vapour (dichloromethane). To get reliable data for this study, we set up a fast and reproducible ageing procedure consisting of thermal treatment of the polymer films (100℃ during 24 h under vacuum). As expected, measurements recorded from time-lag experiments and isothermal sorption showed strong variations of the PTMSP transport properties before and after the thermal ageing procedure. Freshly cast membranes exhibited high permeability, whereas after ageing a 40-45% decrease of the permeability was recorded for both probes. The results demonstrated that only the glassy physical microstructure of PTMSP was affected by the ageing procedure, while the chemical structure was unchanged. Based on a dual-mode model for sorption and a Long's model for diffusion, the analysis of the data showed that the solubility and diffusion coefficients of the gas and the vapour were not affected in the same way. For nitrogen, only the diffusion coefficient decreased, whereas for dichloromethane, the thermal treatment mainly influenced the sorption coefficient. The lower permeability due to the combination of sorption and diffusion parameters could be attributed to a change of the PTMSP hole geometry or the hole connections.
机译:根据两个探针分子,永久性气体(氮气)和有机蒸气(二氯甲烷)的溶解度和扩散系数,研究了新鲜铸造和老化的聚(1-三甲基甲硅烷基-1-丙炔)(PTMSP)膜中的气体和蒸汽渗透性)。为了获得可靠的数据,我们建立了一个快速且可重现的老化程序,该程序包括对聚合物薄膜进行热处理(真空中24小时内保持100℃)。正如预期的那样,通过时滞实验和等温吸附记录的测量结果表明,在热老化过程之前和之后,PTMSP的传输特性发生了很大的变化。新鲜流延的膜表现出高渗透率,而老化后,两种探针的渗透率均降低了40-45%。结果表明,老化过程仅影响PTMSP的玻璃状物理微观结构,而化学结构未发生变化。基于吸附的双模模型和扩散的Long模型,数据分析表明,气体和蒸气的溶解度和扩散系数不会以相同的方式受到影响。对于氮,仅扩散系数降低,而对于二氯甲烷,热处理主要影响吸附系数。由于吸收和扩散参数的组合而导致的较低渗透率可归因于PTMSP孔几何形状或孔连接的变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号