...
首页> 外文期刊>Journal of materials science >Structural and optical characterization of CdSe nanocrystals (NCs) embedded into a porous silicon nanostructure
【24h】

Structural and optical characterization of CdSe nanocrystals (NCs) embedded into a porous silicon nanostructure

机译:嵌入多孔硅纳米结构中的CdSe纳米晶体(NC)的结构和光学表征

获取原文
获取原文并翻译 | 示例

摘要

AbstractThe aim of this work is to study the effect of cadmium selenide nanocrystals (CdSe NCs) incorporation into porous silicon (PS) on its structural and opto-electronic properties using a simple method. We focused our investigation on the effect of thermal annealing after the deposition of CdSe into the (PS) layer. Obtained results prove the beneficial role of this treatment and its dependence with temperature. The CdSe NCs was incorporated into the PS layer by spin coating method and then annealed in ambient atmosphere for 30 min at different temperatures between 150 and 300 °C. The effect of thermal annealing on the structural and optical properties of the treated PS with CdSe NCs was investigated using Fourier transmission infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning electron microscope (SEM), UV-vis-NIR spectrometer, WTC-120 lifetime tester and PL spectroscopy. The X-ray diffraction results clearly revealed the phase transformation of the deposited CdSe from metastable nanocrystalline cubic (zinc blende type) to a mixture of cubic and hexagonal (wurtzite type), and finally into stable hexagonal. A decrease in the reflectivity was obtained after incorporating the CdSe NCs onto the PS layers, before and after annealing. The samples PS treated with CdSe NCs show an important enhancement in the minority carrier lifetime (τeff) indicating an improved surface quality in comparison with the untreated sample (reference). The photoluminescence intensity shows an obvious dependence with the variation of the annealing temperature compared to the untreated porous silicon layer.
机译: 摘要 这项工作的目的是研究硒化镉纳米晶体(CdSe NCs)掺入多孔材料中的作用。硅(PS)的结构和光电特性采用一种简单的方法。我们将研究重点放在将CdSe沉积到(PS)层后的热退火效果上。所得结果证明了该处理的有益作用及其对温度的依赖性。将CdSe NCs通过旋涂法结合到PS层中,然后在环境气氛中于150至300°C之间的不同温度下退火30分钟。使用傅立叶透射红外光谱(FTIR),X射线衍射(XRD),扫描电子显微镜(SEM),UV-vis-NIR光谱仪研究了热退火对使用CdSe NCs处理的PS的结构和光学性能的影响,WTC-120寿命测试仪和PL光谱仪。 X射线衍射结果清楚地表明,沉积的CdSe从亚稳的纳米晶立方晶(锌共混物类型)到立方晶和六方晶(纤锌矿型)的混合物相变,最终变成稳定的六方晶。在退火之前和之后将CdSe NCs掺入PS层后,反射率会降低。用CdSe NCs处理的样品PS在少数载流子寿命(τ eff )上有重要的提高,表明与未处理的样品(参考)相比,表面质量得到了改善。与未处理的多孔硅层相比,光致发光强度与退火温度的变化具有明显的相关性。

著录项

  • 来源
    《Journal of materials science》 |2018年第4期|3458-3466|共9页
  • 作者单位

    Laboratory of Semiconductors, Nanostructures and Advanced Technology (LSNTA), Research and Technology Center of Energy,Faculty of Sciences of Tunis;

    Laboratory of Semiconductors, Nanostructures and Advanced Technology (LSNTA), Research and Technology Center of Energy;

    Laboratory of Semiconductors, Nanostructures and Advanced Technology (LSNTA), Research and Technology Center of Energy,Faculty of Sciences of Bizerte, Carthage University;

    Higher Institute of Applied Science and Technology of Sousse;

    Laboratory of Semiconductors, Nanostructures and Advanced Technology (LSNTA), Research and Technology Center of Energy;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号