首页> 外文期刊>Journal of Low Temperature Physics >Preparation of High-Density Polyethylene/Exfoliated Graphite Composite via a New Method of in Situ Synthesis–Thermal Expansion and Determination of Antistatic Performance
【24h】

Preparation of High-Density Polyethylene/Exfoliated Graphite Composite via a New Method of in Situ Synthesis–Thermal Expansion and Determination of Antistatic Performance

机译:一种新的原位合成-热膨胀法和抗静电性能测定方法制备高密度聚乙烯/片状石墨复合材料

获取原文
获取原文并翻译 | 示例
           

摘要

A new method of in situ synthesis and thermal expansion was developed for preparing high-density polyethylene/exfoliated graphite composite. In the processes, an expandable composite was manufactured by high-density polyethylene and expandable graphite via the in situ synthesis. And then the final composite was prepared by the product obtained previously via the thermal expansion. The experimental results showed that the resistance values of the composite reached 2.58×107, 2.50×107, 2.46×107, 2.41×107, 2.34×107, 2.31×107, 2.27×107, 2.22×107 and 2.18×107 Ω and the expansion volumes of the composite were of 14.0, 15.0, 16.0, 16.3, 17.0, 18.1, 19.0, 20.0 and 22.0 ml g−1 when the mass ratios were 10:1.0, 10:1.5, 10:2.0, 10:2.5, 10:3.0, 10:3.5, 10:4, 10:4.5 and 10:5.0 and the expansion temperature was at 160°C. This shows that all of the resistance values are at 107 Ω, so the composite has the antistatic performance.
机译:研究了一种原位合成和热膨胀的新方法,用于制备高密度聚乙烯/片状石墨复合材料。在该方法中,通过原位合成由高密度聚乙烯和可膨胀石墨制造可膨胀复合材料。然后,通过先前通过热膨胀获得的产物制备最终的复合材料。实验结果表明,复合材料的电阻值分别为2.58×10 7 ,2.50×10 7 ,2.46×10 7 ,2.41×。 10 7 ,2.34×10 7 ,2.31×10 7 ,2.27×10 7 ,2.22×10 < sup> 7 和2.18×10 7 Ω,复合材料的膨胀体积分别为14.0、15.0、16.0、16.3、17.0、18.1、19.0、20.0和22.0 ml g -1 当质量比为10:1.0、10:1.5、10:2.0、10:2.5、10:3.0、10:3.5、10:4、10:4.5和10:5.0时,温度为160℃。这表明所有电阻值均为10 7 Ω,因此该复合材料具有抗静电性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号