首页> 外文期刊>Journal of Fusion Energy >Flame Retardant Properties of Plasma Pretreated/Metallic Salt Loaded Cotton Fabric Before and After Direct Dyeing
【24h】

Flame Retardant Properties of Plasma Pretreated/Metallic Salt Loaded Cotton Fabric Before and After Direct Dyeing

机译:等离子预处理/金属盐负载棉织物在直接染色前后的阻燃性能

获取原文
获取原文并翻译 | 示例
       

摘要

In this research work, cotton fabrics were pre-treated with low temperature plasma (LTP) and then inoculated in various metallic salts and flame retardancy of cotton fabric was investigated. More polar functional groups were present on the substrate surface after LTP pretreat-ment. Titanium dioxide (TiO_2), zinc sulfate (ZnSO_4), lead (Ⅱ) acetate [Pb(C_2H_3O_2)_2], aluminium sulfate tAl_2(SO_4)_3] and silver nitrate (AgNo_3) were used as metallic salts. The flame retardancy of the samples was characterized by limiting oxygen index (LOI) and char yield. Good flame retardant activity for Al_2(SO_4)_3 and AgNo_3 treated fabrics were achieved, however, the effect of TiO_2 and ZnSO_4 on flame retardany of cotton fabrics was moderate. It was concluded that, nitrogen plasma pretreatment, improve the flame retardant properties of cotton samples. The plasma treated and Aluminium sulfate loaded cotton fabric sample has a LOI value of 23.3. It shows that, nitrogen plasma pretreatment has synergistic effect on metallic salts for improving the flame retardant properties of cotton samples. In this research work, the dyeability of samples after loading with metallic salts was investigated. Also effect of dyeing on flame retardant properties was studied. The cotton fabrics treated with metallic salts demonstrate an excellent dye-ability property. Color intensities of the dyed fabrics were measured by using a UV VIS-NIR Reflective Spectropho-tometer, over the range of 200-800 nm. The results showed that, by using silver nitrate as mordant before dying, the relative color strength (K/S values) of the dyed fabrics has been increased. Water drop test and wash fastness determination (ISO 105-C01) were conducted. Also Electronic Crock meter/Rubbing Fastness Tester AATCC 8 was used to determine the color fastness of textiles. We also concluded that dyeing the plasma treated and inoculated cotton fabrics do not have any negative effect on flame retardancy of cotton fabric.
机译:在这项研究工作中,棉织物经过低温等离子体(LTP)预处理,然后接种到各种金属盐中,并研究了棉织物的阻燃性。 LTP预处理后,基材表面上存在更多的极性官能团。使用二氧化钛(TiO_2),硫酸锌(ZnSO_4),乙酸铅(Ⅱ)[Pb(C_2H_3O_2)_2],硫酸铝tAl_2(SO_4)_3]和硝酸银(AgNo_3)。样品的阻燃性通过限制氧指数(LOI)和焦炭收率来表征。 Al_2(SO_4)_3和AgNo_3处理的织物具有良好的阻燃活性,但是TiO_2和ZnSO_4对棉织物的阻燃性中等。结论是,氮等离子体预处理提高了棉样品的阻燃性能。经等离子处理且装有硫酸铝的棉织物样品的LOI值为23.3。结果表明,氮等离子体预处理对金属盐具有协同作用,可提高棉样品的阻燃性能。在这项研究工作中,研究了负载金属盐后样品的染色性。还研究了染色对阻燃性能的影响。用金属盐处理的棉织物显示出优异的染色性。通过使用UV VIS-NIR反射分光光度计在200-800nm的范围内测量染色织物的颜色强度。结果表明,通过在染色前使用硝酸银作为媒染剂,染色织物的相对色强度(K / S值)得到了提高。进行了水滴试验和耐洗牢度的测定(ISO 105-C01)。还使用电子摩擦计/摩擦牢度测试仪AATCC 8来确定纺织品的色牢度。我们还得出结论,对经过等离子体处理和接种的棉织物进行染色不会对棉织物的阻燃性产生任何负面影响。

著录项

  • 来源
    《Journal of Fusion Energy》 |2014年第2期|119-124|共6页
  • 作者单位

    Plasma Physics Research Center, Science and Research Branch, Islamic Azad University, Tehran, Iran;

    Department of Textile, Faculty of Engineering, Arak Branch, Islamic Azad University, Arak, Iran;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Plasma treatment; Fabric; Metallic salts; Flame retardant;

    机译:等离子治疗;布;金属盐;不易燃的;
  • 入库时间 2022-08-18 00:40:36

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号