Migration of Bisphenol A from Can Coatings to Liquid Infant Formula during Storage at Room Temperature

摘要

Information on migration of bisphenol A (BPA) from can coatings to foods during storage at room temperature is very limited, and the conclusions from the available studies are not always consistent. To investigate the effect of storage time on BPA migration from can coatings to liquid infant formula at room temperature, samples of 21 canned liquid infant formula products from different cans but the same lot as those analyzed for BPA previously were analyzed for BPA again after storage at room temperature for 10 months. Additional migration of BPA from can coatings to liquid formula during the 10-month storage period at room temperature was observed for 9 of the 21 products, with increases in BPA levels ranging from 29.8 to 110%. Significant differences between the 2007 and 2008 results (P = 0.026) were observed for only one brand of product, which had the lowest BPA levels in the 2007 survey. The BPA levels in the milk-based formula products analy/.ed in 2008 (mean, 6.8 ng/g) were significantly higher (P = 0.00023) than those in the milk-based formula products analyzed in 2007 (mean, 5.0 ng/g), whereas the differences in BPA levels between the soya-based formula products analyzed in 2008 (mean, 5.3 ng/g) and those analyzed in 2007 (mean, 5.8 ng/g) were not significant (P = 0.097). No obvious correlation between the product expiration date and the level of BPA migration from can coatings was observed.