首页> 外文期刊>Journal of electronic imaging >Ground maneuvering target tracking based on the strong tracking and the cubature Kalman filter algorithms
【24h】

Ground maneuvering target tracking based on the strong tracking and the cubature Kalman filter algorithms

机译:基于强跟踪和库曼卡尔曼滤波算法的地面机动目标跟踪

获取原文
获取原文并翻译 | 示例
       

摘要

In an effort to improve the tracking accuracy of the ground maneuvering target in infrared images, a method is proposed based on the strong tracking filter (STF) and the cubature Kalman filter (CKF) algorithms. In this method, the fading factor is introduced from the STF algorithm and is calculated by transforming the nonlinear measurement variance matrix to be linear approximately, and then the fading factor is used to correct the prediction error covariance matrix (PECM) of CKF, so that the gain matrix can be adjusted at real time and hence the tracking ability of the maneuvering target could be improved. After the digital simulation experiment, it is shown that, comparing with CKF and the unscented Kalman filter algorithms, the average tracking accuracy of the location is increased by more than 20% with the target velocity under 20 m/s and acceleration under 5 m/s(2), and it can even be increased by 50% when the target step maneuver occurs. With the tracking experiment on the real infrared tank images, it can be concluded that the target could be tracked stably by the proposed method, and the maximum tracking error is not more than 8 pixels even though the 180 deg turning takes place. c 2016 SPIE and IS&T
机译:为了提高地面机动目标在红外图像中的跟踪精度,提出了一种基于强跟踪滤波器(STF)和库曼卡尔曼滤波(CKF)算法的方法。该方法从STF算法引入衰落因子,并通过将非线性测量方差矩阵近似转换为线性来计算衰落因子,然后将该衰落因子用于校正CKF的预测误差协方差矩阵(PECM),从而增益矩阵可以实时调整,因此可以提高机动目标的跟踪能力。经过数字仿真实验,表明与CKF和无味卡尔曼滤波算法相比,目标速度在20 m / s以下,加速度在5 m /以下时,该位置的平均跟踪精度提高了20%以上。 s(2),甚至可以在发生目标步调时增加50%。通过对真实红外坦克图像的跟踪实验,可以得出结论,该方法可以稳定地跟踪目标,即使发生180度转向,最大跟踪误差也不超过8个像素。 c 2016 SPIE和IS&T

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号