Optimal FSW process parameters for aluminum alloys AA5083

摘要

Friction stir welding (FSW) can produce superior mechanical properties in the weld zone. The purpose of this article is to find the optimum FSW process operating conditions for two plates of aluminum alloy AA5083 welded in butt joint. In addition to optimizing the performance characteristics, the cost is considered in the optimal FSW process. In the FSW procedure, there are four major controllable four-level factors, i.e. the tool rotation speed, transverse speed (feed rate), tool tilt angle with respect to the workpiece surface, and pin tool length. The uncontrollable factors are the ultimate tensile strength and elongation rate which can be converted to signal-to-noise ratios the larger the better. In order to achieve the aim of robustness in the multiple response process, the gray-based Taguchi method is proposed. A gray relational grade obtained from gray relational analysis is used as the multiple performance characteristic. The resulting optimum process parameters are rotation speed at 1800 rpm, transverse speed at 180 mm/min, tool tilt angle at 1°, and pin tool length at 2.9 mm for the best multiple performance characteristics with minimum cost.View full textDownload full textKeywordsFSW, optimal, gray relational analysis, aluminumRelated var addthis_config = { ui_cobrand: "Taylor & Francis Online", services_compact: "citeulike,netvibes,twitter,technorati,delicious,linkedin,facebook,stumbleupon,digg,google,more", pubid: "ra-4dff56cd6bb1830b" }; Add to shortlist Link Permalink http://dx.doi.org/10.1080/02533839.2011.553024