Preparation of near net-shape carbon foams from ally! COPNA-modified bismaleimide resin: Structures and properties

摘要

Near net-shape carbon foams were fabricated directly by pyrolysis of casting parts from ally! condensed polynuclear aromatic (COPNA)-modified bismaleimide (ACMB) resins. Pyrolysis behaviors of the ACMB resins, prepared with different mass ratios of ally! COPNA (AC) resin to 4,4-bismaleimidodiphenyl methane (BDM), were investigated by thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and X-ray diffraction (XRD). In addition, characteristics of the resulting carbon foams were studied including bulk density, open cell, porosity electrical conductivity, thermal conductivity and compressive strength. Results show that the ACMB resins have better thermal properties with lower AC resin/BDM mass ratios, and the structures and characteristics of the carbon foams can be controlled by adjusting AC resin/BDM mass ratio as well as carbonization temperature. More importantly, the carbon foams possess enhanced compressive strength with an increase in the carbonization temperature varying from 900 degrees C to 2400 degrees C, and meanwhile exhibit relatively low thermal conductivity. (C) 2015 Elsevier B.V. All rights reserved.