首页> 外文期刊>International journal of applied ceramic technology >Sintering and Deformation of Solid Oxide Fuel Cells Produced by Sequential Tape Casting
【24h】

Sintering and Deformation of Solid Oxide Fuel Cells Produced by Sequential Tape Casting

机译:顺序流延铸造生产的固体氧化物燃料电池的烧结和变形

获取原文
获取原文并翻译 | 示例
       

摘要

Anode-supported solid oxide fuel cells have been produced by water base sequential tape casting and cosintering. The curvature developed upon cosintering was monitored in situ. By tailoring the green microstructure, it was possible to reduce the curvature rate and to produce flat cells avoiding the need for a creep-flattening treatment. The power density at 800℃ and 0.7 V was 751.7 mW/cm~2.
机译:阳极支撑的固体氧化物燃料电池已经通过水基连续带式铸造和共烧结生产。现场监测在共烧结时产生的曲率。通过调整绿色微结构,可以降低曲率并产生扁平孔,而无需进行蠕变扁平化处理。 800℃和0.7 V时的功率密度为751.7 mW / cm〜2。

著录项

  • 来源
  • 作者单位

    DIMTI, University of Trento, Via Mesiano, 38050 Trento, Italy;

    rnDIMTI, University of Trento, Via Mesiano, 38050 Trento, Italy;

    rnSOFCpower S.r.l, Via Trento, 38017 Mezzolombardo (TN), Italy;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-17 13:42:44

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号