首页> 外文期刊>Letters in heat and mass transfer >Influence of packed honeycomb ceramic on heat extraction rate of packed bed embedded heat exchanger and heat transfer modes in heat transfer process
【24h】

Influence of packed honeycomb ceramic on heat extraction rate of packed bed embedded heat exchanger and heat transfer modes in heat transfer process

机译:填充蜂窝陶瓷对填充床嵌入式换热器传热速率及传热过程中传热方式的影响

获取原文
获取原文并翻译 | 示例
       

摘要

Under the condition that the transient oxidation heat extraction process of coal mine ventilation air methane (VAM) is equivalent to a series of steady state process, the steady state heat extraction experiment platform is built. The influence of the honeycomb ceramic packed in heat extraction zone and its two-side space on heat extraction rate and heat transfer modes is investigated. The experimental results show that the honeycomb ceramic packed in heat extraction zone two-side space can always strengthen heat extract ion of heat exchanger by increasing gas physical flow velocity in bed and radiation heat exchanging area and disturbing heat exchanger leeward side flow field. The contradictory dual characteristic of the influence of the honeycomb ceramic packed in heat extraction zone on heat exchanger heat extraction rate determines that the honeycomb ceramic has no great influence on heat extraction rate and doesn't always strengthen heat exchanger heat extraction. Contribution of heat transfer modes on packed bed embedded heat exchanger heat extraction is investigated using the method of coating heat exchanger outer surface silver; the experimental result shows that 55% contribution of packed bed embedded heat exchanger heat extraction rate is from radiation when gas mass flow rate is 0.15 kg·s~(-1)·m~(-2) and its temperature is 1113 k; with the gas temperature being increased further, radiation will become the main way of packed bed embedded heat exchanger heat extraction.
机译:在煤矿通风瓦斯(VAM)的瞬态氧化吸热过程等同于一系列稳态过程的条件下,建立了稳态吸热实验平台。研究了蜂窝陶瓷填充在排热区及其两侧空间对排热速率和传热方式的影响。实验结果表明,填充在排热区两侧空间的蜂窝陶瓷可以通过增加床层和排热交换区的气体物理流速,扰动热交换器的下风侧流场,来始终增强热交换器的排热能力。装在排热区的蜂窝陶瓷对换热器吸热率影响的矛盾双重特征决定了蜂窝陶瓷对排热率的影响不大,并不总是加强换热器的排热。采用镀银换热器外表面镀银的方法研究了传热方式对填充床嵌入式换热器热萃取的贡献。实验结果表明,当气体质量流量为0.15 kg·s〜(-1)·m〜(-2),温度为1113 k时,填充床嵌入式换热器的热抽出率占辐射的55%。随着气体温度的进一步升高,辐射将成为填充床嵌入式换热器排热的主要途径。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号