首页> 外文期刊>Indian Journal of Fibre & Textile Research >Dimensional behavior of interlock knitted cotton fabrics
【24h】

Dimensional behavior of interlock knitted cotton fabrics

机译:互锁针织棉织物的尺寸行为

获取原文
获取原文并翻译 | 示例
       

摘要

The linear parameters k(c), k(w), and k(s), have been established for bleached interlock fabrics after subjecting the fabrics into reference state, and the width and length shrinkages are measured. Empirical models for wpcm and cpcm are generated applying general linear model technique and using all the independent variables of the experimental plan, viz. linear density of yarn, twist factor of yarn and stitch length of fabrics along with their two level interactions. The stitch density and aerial density (fabric weight per unit area) are estimated using the predicted values of wpcm and cpcm. Fabric shrinkages both width-wise as well as length-wise are modeled and the resulting models are validated establishing its satisfactory degree of fit. The values of k(c), k(w), and k(r) are found to be 5.64, 4.0 and 1.41 respectively. Stitch length is found to be the prime factor influencing the wpcm, cpcm and aerial density. The models established can be effectively utilized to adopt the corrective measures in the event of any abnormal shrinkages, both width-wise and length-wise.
机译:在使织物处于参考状态后,已为漂白互锁织物建立了线性参数k(c),k(w)和k(s),并测量了宽度和长度的收缩率。 wpcm和cpcm的经验模型是使用一般线性模型技术并使用实验计划的所有自变量生成的。纱线的线密度,纱线的捻系数和织物的线迹长度以及它们的两个层次的相互作用。使用wpcm和cpcm的预测值估算针迹密度和空中密度(每单位面积的织物重量)。对织物在宽度方向和长度方向的收缩率都进行了建模,并对所得模型进行了验证,以确定其令人满意的贴合度。发现k(c),k(w)和k(r)的值分别为5.64、4.0和1.41。发现针迹长度是影响wpcm,cpcm和空气密度的主要因素。建立的模型可以有效地用于在宽度和长度方面出现异常收缩的情况下采取纠正措施。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号