首页> 外文期刊>Geoscience and Remote Sensing, IEEE Transactions on >The Electronically Steerable Flash Lidar: A Full Waveform Scanning System for Topographic and Ecosystem Structure Applications
【24h】

The Electronically Steerable Flash Lidar: A Full Waveform Scanning System for Topographic and Ecosystem Structure Applications

机译:电子可控闪光激光雷达:用于地形和生态系统结构应用的全波形扫描系统

获取原文
获取原文并翻译 | 示例

摘要

The electronically steerable flash lidar (ESFL) is a waveform lidar sensor that incorporates two advances relevant to the design of future spaceborne lidar sensors. The first is a nonmechanical scanner that splits a single incoming beam into a variable number of output beams that can be aligned independently across track; the transmitted beam pattern can be changed up to 60 Hz. The second is a flash focal plane array (FFPA) capable of recording waveforms simultaneously from a 128 $times$ 128 pixel grid with individual footprints spread over multiple pixels. In this paper, the incoming beam was used to illuminate eight 8.4-m footprints which were imaged simultaneously on 12 $times$ 12 pixel subsets of the FFPA. The FFPA digitizes waveforms at a vertical resolution of 75 cm over 41 vertical bins to create waveforms of 30.75-m depth. Multiple waveforms obtained using range-gating were combined for these analyses. ESFL data were collected at Manitou Experimental Forest (MEF), located in the Pikes Peak National Forest, Colorado, USA and the Stephen F. Austin Experimental Forest (AEF), located in the Angelina Forest, Nacogdoches, TX. We evaluated the use of individual pixel-level and aggregated footprint-level waveforms and alternate approaches to define the extent of each footprint in the focal plane array. Using discrete return lidar data as a reference, we evaluated the ability of ESFL lidar to estimate canopy height and compared the two sensors' rates of penetration to the terrain surface. We found the footprint-level waveforms were better suited for use with existing waveform processing techniques, although techniques for processing at the pixel-level appear feasible. Relationships between height estimates from each lidar data set were most closely related when footprint-level ESFL waveforms were calculated after removing pixels that- had less than 50% of the maximum energy within that footprint. Regressions between ESFL and reference lidar data estimates of height explained 84% (AEF) and 85% (MEF) of variance; this study could not say definitively which method yielded the more accurate estimate of height.
机译:电子可操纵的闪光激光雷达(ESFL)是一种波形激光雷达传感器,结合了与未来星载激光雷达传感器设计相关的两项进展。第一种是非机械扫描仪,可将单个入射光束分成可变数量的输出光束,可以跨轨道独立对齐。传输的波束方向图可以更改为最高60 Hz。第二个是闪存焦平面阵列(FFPA),它能够同时记录来自128 x 128像素像素网格的波形,各个足迹分布在多个像素上。在本文中,入射光束用于照亮同时在FFPA的12 x 12像素子集上成像的八个8.4-m足迹。 FFPA将垂直分辨率为75厘米的波形数字化在41个垂直仓位上,以创建30.75米深度的波形。使用距离门控获得的多个波形被组合用于这些分析。 ESFL数据是从位于美国科罗拉多州派克斯峰国家森林的Manitou实验森林(MEF)和位于德克萨斯州Nacogdoches的安吉丽娜森林的Stephen F. Austin实验森林(AEF)收集的。我们评估了单个像素级波形和聚合足迹级波形的使用,以及替代方法来定义焦平面阵列中每个足迹的范围。使用离散的返回激光雷达数据作为参考,我们评估了ESFL激光雷达估计机盖高度的能力,并比较了两个传感器对地形表面的穿透率。我们发现覆盖区级波形更适合与现有波形处理技术一起使用,尽管在像素级进行处理的技术似乎可行。在去除具有小于该足迹内最大能量的50%的像素后,计算足迹级ESFL波形时,来自每个激光雷达数据集的高度估计之间的关系最为密切。 ESFL和参考激光雷达数据的身高估算值之间的回归解释了84%(AEF)和85%(MEF)的方差;这项研究无法确切地说出哪种方法可以得出更准确的身高估算值。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号