Performance, Area, and Power Evaluations of Ultrafine-Grained Run-Time Power-Gating Routers for CMPs

摘要

This paper proposes the ultrafine-grained run-time power gating of on-chip routers, in which the power supply to each router component (e.g., virtual-channel buffer, virtual-channel multiplexer, and crossbar multiplexer and output latch) can be individually controlled based on the applied workload. Since only the router components that are transferring a packet are activated, the leakage power of the on-chip network can be reduced to a near-optimal level. However, such techniques inherently increase the communication latency and degrade the application performance, since a certain amount of wakeup latency is required to activate the sleeping components. To mitigate this wakeup latency, an early wakeup method that can preliminarily detect the next packet arrival and activate the corresponding components is essential. We designed and implemented an ultrafine-grained power-gating router using a commercial 65 nm process. We propose four early wakeup methods and combine them with the power-gating router. The proposed router with the early wakeup methods is evaluated in terms of its application performance, area overhead, and leakage power reduction taking into account the on/off energy overhead. The simulation results showed that it reduces the leakage power by 54.4–59.9% on average even when the application programs are fully running, at the expense of 4.6% of the area and 0.7–3.7% of the performance overheads when we assume a 1 GHz operation.