首页> 外文期刊>Fusion Engineering and Design >Installation of liquid phase catalytic exchange columns for the Wolsong tritium removal facility
【24h】

Installation of liquid phase catalytic exchange columns for the Wolsong tritium removal facility

机译:为Wolsong tri去除设施安装液相催化交换塔

获取原文
获取原文并翻译 | 示例
       

摘要

The catalyst loading and installation of liquid phase catalytic exchange (LPCE) columns for the Wolsong tritium removal facility (WTRF) was completed on the 22nd of April 2006. Two LPCE columns are connected in series. The first column has 28 sections, a sump and a separate overhead condenser. The second column has 27 sections, a sump and a humidifier. Each section of the LPCE columns consists of three parts: mass transfer packing bed, separate catalyst bed and liquid distributor. The Sulzer CY packing for the vapor-liquid mass transfer is packed into the inner shell of each section and the wet proofed catalyst for the vapor-gas reaction is loaded into between the inner and outer shell. The liquid distributors are equipped on the Sulzer CY packing of each section. The performance test will be accomplished according to the WTRF construction and commissioning schedule. The WTRF is the first commercial facility applying LPCE process for the tritium removal. The WTRF is expected to remove 7 MCi-tritium per year at least from the Wolsong CANDU6 reactors and will be a main tritium source for the ITER.
机译:Wolsong removal去除设施(WTRF)的催化剂装载和液相催化交换(LPCE)柱的安装已于2006年4月22日完成。两个LPCE柱串联连接。第一塔有28个部分,一个贮槽和一个单独的塔顶冷凝器。第二列有27个部分,一个贮槽和一个加湿器。 LPCE色谱柱的每个部分均由三部分组成:传质填料床,独立的催化剂床和液体分配器。将用于汽-液传质的苏尔寿CY填料装填到每个部分的内壳中,并将用于汽-气反应的防湿催化剂装在内壳之间。每个部分的Sulzer CY包装上都装有液体分配器。性能测试将根据WTRF的建设和调试时间表进行。 WTRF是第一个使用LPCE工艺去除removal的商业设施。预计WTRF至少每年将从Wolsong CANDU6反应堆中去除7个MCi and,并将成为ITER的主要tri来源。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号