首页> 外文期刊>Fusion Engineering and Design >Impact of risk analysis on ITER nuclear buildings layout
【24h】

Impact of risk analysis on ITER nuclear buildings layout

机译:风险分析对ITER核建筑布局的影响

获取原文
获取原文并翻译 | 示例
       

摘要

The internal layout of ITER nuclear buildings (Tokamak, Tritium, Hot cell and Radwaste buildings) is the result of an iterative process.rnNotwithstanding civil engineering requirements, technical and functional requirements for the processes housed in the buildings, the internal layout must also take into account safety requirements and workers protection requirements in normal, incidental and accidental conditions.rnPotential hazards and constraints result in the definition of various zonings. Each room is classified depending on the level of the risks induced by normal and incidental or accidental conditions:rn1. radiological exposure to tritium, and activated products → radiological zoning;rn2. exposure to beryllium (vacuum vessel blankets) → beryllium zoning;rn3. exposure to electromagnetic fields during plasma shots → electromagnetic zoning;rn4. fire hazard: fire compartmentalization;rn5. explosion hazard: anti-blast zoning;rn6. waste treatment → waste zoning.rnPrevention of common mode failure due to internal hazards (fire, flooding, load drop...) for redundant safety important components is also taken into account by geographical separation or by installation of protections between components (either in the same room or preferably when possible by segregation in different rooms).rnThe designer has also taken into account access requirements to equipments and circulation rules for personal, material and substances in ITER nuclear buildings.rnRisk analyses are performed in the Preliminary Safety Report in order to demonstrate that the layout of ITER nuclear buildings allows meeting the safety objectives and takes into account the requirements associated with the zonings classifications and complies with the regulation.rnWhen necessary, modifications are implemented in the design. For example, recent layout modifications are been studied in the tritium building: utility rooms (electrical supply) were transferred outside the radiological hazard zones. A direct access from the outside has been provided, so that personal can access these electrical rooms without having to go through radiological zones.
机译:ITER核建筑(托卡马克,Tri,热室和Radwaste建筑物)的内部布局是迭代过程的结果。rn尽管有土木工程要求,建筑物中所容纳过程的技术和功能要求,但内部布局也必须考虑到考虑正常,偶然和意外情况下的安全要求和对工人的保护要求。潜在的危害和限制导致对各个区域的定义。根据正常,偶然或意外情况引起的风险级别,对每个房间进行分类:rn1。放射性暴露于tri和活化产物→放射性分区; rn2。暴露于铍(真空容器毯)→铍分区; rn3。等离子发射期间暴露于电磁场→电磁分区; rn4。火灾隐患:防火隔离; rn5。爆炸危险:防爆区; rn6。废物处理→废物分区。rn通过地理隔离或在组件之间安装保护装置(无论是在内部还是外部),也要考虑到由于冗余,重要安全组件的内部危险(火灾,洪水,负载下降...)而导致的共模故障的预防。设计者还考虑了对ITER核建筑中个人,材料和物质的设备的访问要求和流通规则.rn在《初步安全报告》中进行了风险分析,以便证明ITER核建筑的布局可以满足安全目标,并考虑到与分区分类相关的要求并符合法规.rn必要时在设计中进行修改。例如,最近在building建筑中对布局进行了研究:杂物间(电力供应)被转移到放射危险区域之外。已经提供了从外部直接进入的通道,因此个人可以进入这些电气室而不必经过放射区。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号