Infrared thermography inspection for monoblock divertor target in JT-60SA

摘要

Carbon fiber composite (CFC) monoblock divertor target is required for power handling in JT-60SA. Quality of the targets depends on a joining technology in manufacturing process. To inspect the quality of more than 900 target pieces, efficient non-destructive inspection is needed. An infrared thermography inspection (IR inspection), has been proposed by ITER and IRFM, where the quality between CFC and a cooling tube is examined by a use of transient thermal response at a rapid switch from hot to cold water flow. In JT-60SA divertor target, a screw tube will be employed to obtain high heat transfer efficiency with simple structure. Since the time response of the screw tube is much faster than that of smooth tube, it is required to confirm the feasibility of this IR inspection. Thus, the effect of joining defects on transient thermal response of the targets has been investigated experimentally by using the mock-up targets containing defects which are artificially made. It was found that the IR inspection can detect the defects. Moreover, screening criteria of IR inspection for acceptable monoblock target is discussed.