...
首页> 外文期刊>Fuel >Evaluation of the effect of gasoline fumigation on performance and emission characteristics of a diesel engine fueled with B20 using an experimental investigation and TOPSIS method
【24h】

Evaluation of the effect of gasoline fumigation on performance and emission characteristics of a diesel engine fueled with B20 using an experimental investigation and TOPSIS method

机译:使用实验研究和TOPSIS方法评估汽油熏蒸对使用B20燃料的柴油发动机的性能和排放特性的影响

获取原文
获取原文并翻译 | 示例

摘要

Technique for Order Performance by Similarity to Ideal Solution (TOPSIS) method was used to comprehensively evaluate performance and emission characteristic of DI diesel engine with fumigation gasoline under different engine operating conditions. Diesel and B20 fuel were considered as baseline fuels and gasoline was inducted as fumigation in intake manifold at two different ratio, so that at each operation point, six cases of fuel were tested. The experimental results showed that gasoline fumigation method for both baseline fuels of diesel and B20 results in a significant increase in UHC and CO emissions, and decrease in exhaust gas temperature, smoke opacity and NO and CO2 emissions. Also, gasoline fumigation increased the brake thermal efficiency at medium and higher loads to about 5% for diesel baseline fuel, while the brake thermal efficiency decreased slightly in case of the B20 baseline fuel with gasoline fumigation. Moreover, the using B20 as an alternative fuel to diesel fuel in modes of with fumigation gasoline reduced the UHC and CO emissions, smoke opacity, exhaust gas temperature respectively to about 20.5%, 16.4%, 9% and 1.1% on average throughout engine loading. While, NO emission of B20 was up to 5% higher than diesel at modes with fumigation gasoline. Finally, all criteria of performance and emission were considered and the evaluation process done to obtain final ranking and choosing the best alternative or the best combination of fuel. From the analytical results it was determined that case of B20 with fumigation gasoline results in desirable performance and minimum emissions at some operation points.
机译:采用类似于理想溶液的订单性能技术(TOPSIS),对熏蒸汽油在不同发动机工况下的直喷柴油机性能和排放特性进行了综合评价。柴油和B20燃料被认为是基准燃料,而汽油则以熏蒸的形式以两种不同的比例引入进气歧管中,因此在每个工作点测试了六种燃料。实验结果表明,使用汽油熏蒸法对柴油和B20的两种基本燃料进行处理,会导致UHC和CO排放量显着增加,并降低废气温度,烟气不透明度以及NO和CO2排放量。此外,汽油熏蒸将中等和较高负荷下的柴油基准燃料的制动热效率提高到大约5%,而对于使用汽油熏蒸的B20基准燃料,制动热效率则略有下降。此外,在熏蒸汽油模式下使用B20替代柴油作为燃料,在整个发动机负载期间,UHC和CO排放量,烟气不透明度和废气温度分别平均降低了约20.5%,16.4%,9%和1.1%。 。而在熏蒸汽油模式下,B20的NO排放量比柴油高出5%。最后,考虑了所有性能和排放标准,并完成了评估过程以获得最终排名,并选择最佳替代燃料或最佳燃料组合。从分析结果可以确定,使用熏蒸汽油的B20案例在某些操作点上具有理想的性能和最低的排放量。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号