Impact of Air Velocity on the Detection of Fires in Conveyor Belt Haulageways

摘要

A series of large-scale experiments were conducted in an above-ground fire gallery using three different types of fire-resistant conveyor belts and four air velocities for each belt. The goal of the experiments was to understand and quantify the effects of air velocity on the detection of fires in underground conveyor belt haulageways and to deter mine the rates of generation of toxic gases and smoke as a fire progresses through the stages of smoldering coal, flaming coal, and finally a flaming conveyor belt. In the experi ments, electrical strip heaters, imbedded approximately 5 cm below the top surface of a large mass of coal rubble, were used to ignite the coal, producing an open flame. The flaming coal mass subsequently ignited 1.83-m-wide conveyor belts located approximately 0.30 m above the coal surface. Gas samples were drawn through an averaging probe for continuous measurement of CO, CO_2, and O_2 as the fire progressed. Approximately 20 m from the fire origin and 0.5 m below the roof of the gallery, two commercially available smoke detectors, a light obscuration meter, and a sampling probe for measurement of total mass concentration of smoke particles were placed. Two video cameras were located upstream of the fire origin and along the gallery at about 14 m and 5 m in order to detect both smoke and flames from the fire. This paper discusses the impact of ventilation air flow on alarm times of the smoke detectors and video cameras, CO levels, smoke optical densities and smoke obscuration, total smoke mass concentrations, and fire heat release rates, examining how these various parameters depend upon air velocity and air quantity, the product of air velocity, and entry cross-section.