Thermal analysis of polymer ignition

摘要

Gas phase criteria for the onset of flaming combustion of solids in fires are used to locate a critical temperature T-cr in a nonisothermal analysis (TA) experiment that corresponds to the surface temperature of the solid at ignition in a fire test, T-ign. This critical TA temperature occurs at low conversion of solid to gaseous fuel so it is independent of the heating rate in the test or the thermal decomposition reaction model. However, T-cr depends on the thermal properties of the polymer and the conditions of the fire test in which the gas phase criteria were measured. Nonisothermal analysis data in nitrogen and air were obtained for 20 polymers by thermogravimetric analysis and microscale combustion calorimetry. The critical temperatures T(cr)s obtained from TA experiments compared favorably with analytic results for a simple polymer ignition model and finite element simulations and were in qualitative agreement with ignition temperatures measured in standardized fire tests.