The effect of interference-fit fasteners on the fatigue life of central hole specimens

摘要

Fatigue tests were carried out on 2024-T351, thickness 1.6 mm, central hole specimens containing pins installed with five different interference-fit levels. Tests clearly demonstrated the beneficial effect of interference fit on fatigue resistance, up to the maximum value examined, 2.5 percent. A three-dimensional (3D) finite-element model was used in order to characterize the stress field around the hole. A large specimen, with a 40-mm-diameter hole filled with interference-fit pin, was instrumented by strain gauges and statically tested in order to check FEM results. A very good correlation existed between measured and numerically evaluated strains. FEM results demonstrated the well-known effect of interference-fit fasteners on reducing stress ranges. By increasing the interference level, the stress range was practically unchanged, while the mean stress decreased. Interference-fit produces a biaxial stress state, which must be taken into account for fatigue evaluation. In the present case, a simple criterion, based on hoop strain, predicted the fatigue results quite well with the exception of open hole fatigue test results, which were overestimated.