首页> 外文期刊>Experimental Heat Transfer >Loop thermosiphon thermal collector for waste heat recovery power generation
【24h】

Loop thermosiphon thermal collector for waste heat recovery power generation

机译:循环热虹吸集热器,用于余热回收发电

获取原文
获取原文并翻译 | 示例
       

摘要

A loop thermosiphon thermal collector was developed for the waste heat recovery power generation with electric capacity of 500 W. The heat collector with heat transfer area of 0.159 m(2) (500 mm width and 300 mm depth) was connected to the condenser with a shrunken heat transfer area by a loop. The thermal performance of the apparatus was declined when increasing the water filling rate to 90% as the working fluid occupied the internal volume. In the range of water filling rate between 30% and 60%, the effective thermal conductivity was around100 times of the conductivity of copper.
机译:开发了一个循环热虹吸集热器,用于产生500 W的废热回收发电。将传热面积为0.159 m(2)(宽度为500 mm,深度为300 mm)的集热器连接到冷凝器,循环缩小了传热面积。当将注水率提高到90%时,由于工作流体占据了内部容积,设备的热性能下降。在注水率在30%到60%之间的范围内,有效导热系数约为铜的导热系数的100倍。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号