The Microwave Leakage Detector is built on a double-sided PCB available from the EPE PCB Service, coded 04103161 and measuring 64 x 32mm. Most parts are surface-mount type and all but one are fitted on the top side of the board. The exceptions are the battery holder and power switch (both through-hole parts) and the RF diode (D1) which is soldered on the underside. Refer to the PCB overlay diagram, Fig. 2, during assembly.
展开▼
机译:微波泄漏检测器基于EPE PCB服务提供的双面PCB,编码为04103161,尺寸为64 x 32mm。大部分零件都是表面贴装型,除一个以外的所有零件都安装在电路板的顶部。电池座和电源开关(均为通孔部分)以及焊接在底侧的RF二极管(D1)除外。组装时请参考PCB覆盖图,图2。
展开▼