首页> 外文期刊>European Journal of Wood and Wood Products >Fabrication optimization of polypropylene composites reinforced with steam-exploded wood flour by wet process
【24h】

Fabrication optimization of polypropylene composites reinforced with steam-exploded wood flour by wet process

机译:湿法蒸汽炸木粉增强聚丙烯复合材料的制备优化

获取原文
获取原文并翻译 | 示例
       

摘要

To take advantage of the unique characteristics of the wood flour by combining them with plastic in conventional panel pressing methods, a wet process was developed to make composites using polypropylene and steam-exploded (SE) flour from small-diameter loblolly pine. Wet-laid wood flour/polymer composites were fabricated using a standard TAPPI handsheet method followed by compression molding. The variables that may affect the product properties were investigated using an orthogonal test design. The results revealed that the modulus of elasticity (MOE) of composites increased, while modulus of rupture (MOR) decreased with increasing SE wood flour content. Both MOE and MOR of the composites increased with maleic anhydride grafted polypropylene content. Dynamic mechanical analyzer and differential scanning calorimetry measurement gave insight into the structure of these composites, and scanning electron microscope was used to characterize the interfacial adhesion. Um die besonderen Eigenschaften von Holzmehl in Kombination mit Kunststoff bei konventionellen Plattenpressverfahren voll auszunutzen, wurde ein Nassverfahren zur Herstellung von Verbundwerkstoffen aus Polypropylen und im Dampfdruckverfahren erzeugtem Holzmehl aus Weihrauchkieferschwachholz entwickelt. Holzmehl-Polypropylen-Verbundstoffe wurden nach einem TAPPI-Standardverfahren im Nassverfahren aufgebracht und anschließend verpresst. Die Variablen, die die Produkteigenschaften beeinflussen können, wurden mittels eines orthogonalen Versuchsdesigns untersucht. Die Ergebnisse zeigten, dass der E-Modul der Verbundwerkstoffe mit zunehmendem Holzmehlanteil zunahm, während die Biegefestigkeit abnahm. Mit steigendem Gehalt an Maleinsäureanhydrid gepfropftem Polypropylen stieg sowohl der E-Modul als auch die Biegefestigkeit der Werkstoffe. Dynamisch-mechanische Analysen und Differenzialrasterkalorimeter-Messungen gaben einen Einblick in die Struktur dieser Verbundwerkstoffe. Mittels eines Rasterelektronenmikroskops wurde die Haftung zwischen dem Holz und der Kunststoffmatrix untersucht.
机译:为了通过在常规面板压制方法中将木粉与塑料结合起来利用木粉的独特特性,开发了一种湿法工艺,该工艺使用聚丙烯和小直径火炬松的蒸汽爆炸(SE)面粉制成复合材料。湿法铺设的木粉/聚合物复合材料是使用标准的TAPPI手抄纸方法制造的,然后进行压模。使用正交测试设计研究了可能影响产品性能的变量。结果表明,随着SE木粉含量的增加,复合材料的弹性模量(MOE)增加,而断裂模量(MOR)降低。复合材料的MOE和MOR均随马来酸酐接枝聚丙烯含量的增加而增加。动态力学分析仪和差示扫描量热法测量可深入了解这些复合材料的结构,并使用扫描电子显微镜表征界面粘合力。 Um die besonderen Eigenschaften von Holzmehl在《 Kombination mit Kunststoff bei konventionellen Plattenpressverfahren voll auszunutzen》,《 Wurde ein Nassverfahren zur Herstellung von Verbundwerkstoffen aus Polypropylen und imDefpfdruckverschraen Holzmehl-Polypropylen-Verbundstoffe wurden nach einem TAPPI-Standardverfahren im Nassverfahren aufgebracht undanschließendverpresst。模具制造商,产品制造商,产品制造商,等等。模具,电子模块和通用机械,机械加工,机械制造。防锈剂Gehalt和马来酸二氢呋喃酯丙二醇酯E-模块的替代品,以及Werkstoffe的Biegefestigkeit。动力学分析仪和差动示差计-Messungen gaben einen Einblick在Struktur债务人Verbundwerkstoffe中。米特尔·赖斯(Mittels eines Rasterelektronenmikroskops)与世界经济论坛(Huntung zwischen dem Holz und der Kunststoffmatrix)互不相让。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号