Olive mill wastewater treatment in a membrane bioreactor: process stability and fouling aspects

摘要

An external ceramic membrane bioreactor was used to carry out an experimental study of process stability and fouling aspects for olive mill wastewater (OMW) treatment. Three diluted OMW solutions were used to continuously feed the reactor. An acclimated biomass was employed and the process stability was followed on the basis of the permeate quality and some operating parameters (pressure, temperature, mass flow and dissolved oxygen). Several backpulse combinations were tested to determine the best filtration and backwash time. It appeared that a short backpulse duration was sufficient and that the behaviour, in terms of the permeate flux versus time, stabilized. In terms of increased permeate flux, the effect of the backpulsing depended on the nature of the solution. This improvement was limited, but, in the long-term, backpulsing makes it possible to maintain a constant permeate flux over a period of several days.