Stiffness model for inclined screws in shear-tension mode in timber-to-timber joints

摘要

A stiffness model for inclined screws in timber joints, or as shear connectors in composite timber-to timber members, is presented. Elastic conditions applicable to the initial or linearized part of the load deformation response in the serviceability limit state are assumed. The model for the stiffness or slip modulus is general in nature; it includes both the dowel (or shearing) action and withdrawal action of the screw, the friction between the members and it takes into account possible dissimilar properties and geometries of the different parts of the joint configuration. The model is simplified in the sense that the screw is assumed rigid and the withdrawal stresses along the length of the screw are assumed evenly distributed. However, the effects of flexibility and extensibility of the screw are taken into account by applying a theoretically derived correction factor for the embedment and withdrawal stiffness modulus, respectively. The proposed model is illustrated showing the total stiffness versus the inclination, as well as the relative contributing effect from the shearing and withdrawal stiffness, respectively, the influence of the friction coefficient. Also, the effect of dissimilar properties and geometries between the two parts of the joint is illustrated. Experimental verification of the proposed model is also given. Comparisons with other stiffness models are also made. (C) 2017 Elsevier Ltd. All rights reserved.