首页> 外文期刊>Engineering analysis with boundary elements >Buckling analysis of graphene sheets embedded in an elastic medium based on the kp-Ritz method and non-local elasticity theory
【24h】

Buckling analysis of graphene sheets embedded in an elastic medium based on the kp-Ritz method and non-local elasticity theory

机译:基于kp-Ritz方法和非局部弹性理论的弹性介质中石墨烯片的屈曲分析

获取原文
获取原文并翻译 | 示例
           

摘要

Graphene finds application in nanoscale electronic devices, nano sensors and nanocomposites in which graphene sheets usually rest on an elastic medium. Buckling of graphene sheets can occur in such structures, which significantly influences its performance. Therefore, it is essential to investigate the buckling behavior of graphene for better engineering design and manufacture. The present work provides an element-free kp-Ritz framework to analyze the buckling behavior of graphene. The element-free kp-Ritz method is first implemented to investigate the buckling behavior of single-layered graphene sheets (SLGSs) embedded in elastic foundations, based on the classical plate theory (CLP), incorporating the non-local elasticity theory, which takes small effects into account when dealing with nanostructures. A Winkler-type model is adopted to simulate the functioning of the elastic medium. Numerical solutions for critical buckling loads of SLGSs are obtained by solving the governing differential equations derived from the principle of minimum potential energy using the element-free kp-Ritz method. The concepts of non-local parameter effects and non-local effects are distinguished. The influence of non-local parameters for both side length and aspect ratio on critical buckling loads of SLGSs is analyzed. Additionally, the effects of non-local parameters and the Winkler modulus parameter on the buckling patterns are discussed.
机译:石墨烯可用于纳米级电子设备,纳米传感器和纳米复合材料中,其中石墨烯片通常位于弹性介质上。石墨烯片材会在此类结构中发生屈曲,从而严重影响其性能。因此,研究石墨烯的屈曲行为对于更好的工程设计和制造至关重要。本工作提供了无元素的kp-Ritz框架来分析石墨烯的屈曲行为。首先基于经典平板理论(CLP),结合非局部弹性理论,采用无元素kp-Ritz方法研究嵌入弹性基础中的单层石墨烯片(SLGS)的屈曲行为处理纳米结构时,应考虑小的影响。采用Winkler型模型来模拟弹性介质的功能。通过使用无单元kp-Ritz方法求解从最小势能原理导出的控制微分方程,可以得出SLGS临界屈曲载荷的数值解。区分了非局部参数效应和非局部效应的概念。分析了非局部参数的边长和长宽比对SLGS临界屈曲载荷的影响。此外,讨论了非局部参数和Winkler模量参数对屈曲模式的影响。

著录项

  • 来源
  • 作者单位

    Department of Architecture and Civil Engineering, City University of Hong Kong, Kowloon, Hong Kong SAR, China ,CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, China;

    Department of Architecture and Civil Engineering, City University of Hong Kong, Kowloon, Hong Kong SAR, China ,College of Information Science and Technology, Shanghai Ocean University, Shanghai 201306, China;

    Department of Architecture and Civil Engineering, City University of Hong Kong, Kowloon, Hong Kong SAR, China ,City University of Hong Kong Shenzhen Research Institute Building, Shenzhen Hi-Tech Industrial Park, Nanshan District, Shenzhen, China;

    CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, China;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Buckling; Graphene; Winkler model; Non-local elasticity theory;

    机译:屈曲;石墨烯温克勒模型;非局部弹性理论;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号