The potential for cool roofs to improve the energy efficiency of single storey warehouse-type retail buildings in Australia: A simulation case study

摘要

Australia's commercial building stock exceeds 134 million m(2) of net lettable area, with retail buildings contributing 35% to this sector's energy use. The energy intensity of retail buildings in hotter climates is higher than the national average, as is the energy intensity of smaller buildings (under 1500 m(2)) that are not considered 'high-end' commercial properties. Little attention has been paid to improving the energy efficiency of these types of buildings through regulation (for new buildings) or through market mechanisms (for retrofitting). As many of these buildings are single storey 'warehouse' type buildings, their predominant heat load comes through the roof, and thus are well suited to benefit from cool roof technology. Despite this, there remains a deficiency in quantifying the benefit of such technology in the context of single-storey retail buildings in Australia. This paper reports on an experimentally validated numerical study aimed at addressing this deficiency. Results show that application of cool roof technology to a warehouse type building in a subtropical environment increases the energy efficiency by shifting space temperature towards the design set point (21-23 degrees C), and thus reducing cooling energy demand. This study also indicates an energy saving every month with the application of cool roof, with the largest saving in hotter months and no heating penalty in cooler months. Application of cool roof technology on warehouse style buildings across Australian buildings indicates energy savings can be achieved in all broad Australian climatic zones, with the greatest energy reduction associated with tropical, subtropical and desert environments. (C) 2017 Elsevier B.V. All rights reserved.