首页> 外文期刊>Electronics Letters >Modes, emission beams and losses of THz heterostructure disk lasers: single-mode laser with vertical beam option
【24h】

Modes, emission beams and losses of THz heterostructure disk lasers: single-mode laser with vertical beam option

机译:太赫兹异质结构盘式激光器的模式,发射光束和损耗:带有垂直光束选件的单模激光器

获取原文
获取原文并翻译 | 示例
       

摘要

Properties of disk cavities for terahertz (THz) heterostructure lasers are discussed basing on observation of emission and beam from THz quantum cascade disk laser and analytical evaluation of modes, beams and losses of the laser disk cavities. The measured laser beam has beam peak at about 30° from vertical. To find condition for vertically emitted beam and for evaluation of the laser modes, emission beams and losses simple approach adopted in theory of slit (patch) antennas is used. With this approach results on observed laser beam are discussed and a possibility to create single-frequency disk laser with narrow vertical beam. This can be achieved if only single TEM cavity mode is exited. Several examples of such possibility for 100 µm wavelength with disk cavities from 18 to 200 µm in diameter and with cascade thickness 10 µm are presented. Depending on the diameter the cavity emission losses are higher than or of about that of THz quantum cascade laser waveguide losses or amplification. For wavelength longer than 100 µm and (or) with lower cascade thickness, the losses go down and cavity could be optimised for creation a single-mode powerful vertically emitted disk laser.
机译:基于太赫兹量子级联圆盘激光器的发射和光束观察以及对圆盘腔的模式,光束和损耗的分析评估,讨论了太赫兹(THz)异质结构激光器的圆盘腔的特性。测得的激光束的光束峰值与垂直方向成30度角。为了找到垂直发射束的条件并评估激光模式,发射束和损耗,使用了狭缝(贴片)天线理论中采用的简单方法。通过这种方法,讨论了在观察到的激光束上的结果,并有可能创建具有窄垂直光束的单频盘激光器。如果仅退出单个TEM腔模式,则可以实现此目的。列举了100微米波长,直径为18到200微米的圆盘腔以及10微米级联厚度的这种可能性的几个示例。取决于直径,腔体发射损耗高于或约为太赫兹量子级联激光波导损耗或放大倍数。对于大于100 µm的波长和(或)具有较低级联厚度的波长,损耗会下降,并且可以优化腔体以创建单模强大的垂直发射圆盘激光器。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号