首页> 外文期刊>IEEE Transactions on Electron Devices >Theory of Electrothermal Behavior of Bipolar Transistors: Part I - Single-Finger Devices
【24h】

Theory of Electrothermal Behavior of Bipolar Transistors: Part I - Single-Finger Devices

机译:双极晶体管的电热行为理论:第一部分-单指器件

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

A detailed theoretical and numerical analysis of the electrothermal behavior of single-finger bipolar transistors is proposed. Two models of different complexities are introduced to investigate self-heating effects in bipolar junction transistors (BJTs) and heterojunction bipolar transistors (HBTs) biased with a constant base-emitter voltage source or with a constant base current source. In the constant base-emitter voltage case, simple relations are derived for determining the onset of the flyback behavior in the output characteristics which defines the boundary of the safe operating region. The model indicates that the flyback behavior disappears at high V{sub}(BE) values, and predicts a thermal hysteresis phenomenon at high currents. It is also shown that at high current levels the electrothermal behavior is dominated by ohmic base pushout. If a constant base current is applied, the model shows that both BJTs and HBTs are unconditionally thermally stable. The transient behavior is also considered, and the temperature evolution is investigated for different bias conditions. The model shows that, if the device is biased in the thermally unstable region, thermal breakdown occurs within a finite time instant in the limit case of a zero ballast resistance. Finally, the reduction in the safe operating area due to avalanche effects and to the temperature dependence of thermal conductivity is discussed, and a simplified model is proposed.
机译:提出了详细的理论和数值分析的单指双极晶体管的电热行为。引入了两种不同复杂度的模型来研究在以恒定基极-发射极电压源或恒定基极电流源偏置的双极结型晶体管(BJT)和异质结双极型晶体管(HBT)中的自热效应。在基极-发射极电压恒定的情况下,可以得出简单的关系来确定输出特性中反激行为的开始,该特性定义了安全工作区域的边界。该模型表明,在高V {sub}(BE)值下,反激行为消失了,并预测了在高电流下的热滞现象。还显示出,在高电流水平下,电热行为主要由欧姆基极推出引起。如果施加恒定的基本电流,该模型将显示BJT和HBT都是无条件热稳定的。还考虑了瞬态行为,并研究了不同偏置条件下的温度演变。该模型表明,如果将器件偏置在热不稳定区域,则在零镇流电阻的极限情况下,会在有限的瞬间内发生热击穿。最后,讨论了由于雪崩效应和导热系数对温度的影响而导致的安全操作区域的减少,并提出了简化模型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号