首页> 外文期刊>Ecotoxicology and Environmental Safety >Synthesis of Fe_3O_4/CdS-ZnS nanostructure and its application for photocatalytic degradation of chlorpyrifos pesticide and brilliant green dye from aqueous solutions
【24h】

Synthesis of Fe_3O_4/CdS-ZnS nanostructure and its application for photocatalytic degradation of chlorpyrifos pesticide and brilliant green dye from aqueous solutions

机译:Fe_3O_4 / CdS-ZnS纳米结构的合成及其在水溶液中毒死pesticide农药和亮绿色染料的光催化降解中的应用

获取原文
获取原文并翻译 | 示例
           

摘要

Chlorpyrifos (CP) is an organophosphorus pesticide used to control pests in agriculture. Brilliant green (BG) is a cationic dye widely used in textile and dyeing industry. However, the presence of pollutants in the aquatic environment has harmful effects on the environment and humans. Photocatalytic degradation can be appropriate method for water purification. Therefore, the Fe3O4/CdS-ZnS magnetic nanocomposite was synthesized and characterized by Brunauer-Emmett-Teller (BET) surface area analysis, Energy dispersive x-ray spectroscopy (EDX), X-ray diffraction (XRD), vibrating sample magnetometry (VSM), UV-Vis-diffuse reflectance spectroscopy (DRS), and field emission scanning electron microscopy (FESEM) analyses and was used to degrade pollutants such as chlorpyrifos pesticide and brilliant green dye under visible light with source 300 W. Parameters that may be effective on photocatalytic degradation include pH, photocatalyst amount, contaminant concentration, photocatalyst and contaminant contact temperature and duration, light intensity as well as distance of light source from the reaction vessel. In the present study, the parameters that have the most influence on the degradation process were experimentally optimized, including pH, photocatalyst amount, photocatalyst reuse, and initial concentration. The study of the photocatalytic degradation rate of chlorpyrifos and brilliant green in optimal conditions (pH = 7, the concentration of pollutants = 10 ppm, volume of pollutants = 5 mL, and photocatalyst amounts for CP and BG were 0.0100 and 0.0015 g respectively) was obtained by Langmuir-Hinshelwood model. According to this model, the k(app) value for CP and BG were respectively 0.0315 and 0.0119 min(-1) respectively. It has been concluded that the composition of CdS and ZnS caused inhibition of the recombination of photogenerated charge carriers, leading to high catalytic efficiency. Based on the results, the synthesized nanocatalyst showed that it has the ability to photocatalytic degradation of chlorpyrifos and brilliant green in aqueous solutions.
机译:毒死rif(CP)是一种有机磷农药,用于控制农业中的害虫。亮绿(BG)是一种阳离子染料,广泛用于纺织和印染行业。但是,水生环境中污染物的存在会对环境和人类产生有害影响。光催化降解可以是用于水净化的合适方法。因此,合成了Fe3O4 / CdS-ZnS磁性纳米复合材料,并通过Brunauer-Emmett-Teller(BET)表面积分析,能量色散X射线能谱(EDX),X射线衍射(XRD),振动样品磁力法(VSM)进行了表征。 ),UV-Vis漫反射光谱法(DRS)和场发射扫描电子显微镜(FESEM)分析,并用于在可见光下使用300 W的光源降解污染物,如毒死rif农药和亮绿色染料。可能有效的参数光催化降解的条件包括pH,光催化剂量,污染物浓度,光催化剂和污染物接触温度和持续时间,光强度以及光源与反应容器的距离。在本研究中,通过实验优化了对降解过程影响最大的参数,包括pH值,光催化剂用量,光催化剂再利用和初始浓度。在最佳条件下(pH = 7,污染物浓度= 10 ppm,污染物体积= 5 mL,CP和BG的光催化剂量分别为0.0100和0.0015 g),研究了毒死rif和亮绿色的光催化降解速率。由Langmuir-Hinshelwood模型获得。根据此模型,CP和BG的k(app)值分别为0.0315和0.0119 min(-1)。已经得出结论,CdS和ZnS的组成引起对光生电荷载流子的重组的抑制,从而导致高催化效率。根据该结果,合成的纳米催化剂表明其具有在水溶液中光催化降解毒死rif和亮绿色的能力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号