High sensitivity detection of partial discharge acoustic emission within power transformer by sagnac fiber optic sensor

摘要

Partial discharge acoustic detection is an important monitoring tool for power transformer diagnosis, which was traditionally performed by mounting the piezoelectric transducers on the oil tank surface. The disadvantage of partial discharge acoustic detection is its low sensitivity when partial discharge occurs inside the winding, which greatly compromises the value of partial discharge acoustic detection. Fiber optic sensors that can be deployed within power transformer are expected to be a potential solution. In this research, we used a Sagnac fiber sensor system built in lab to investigate the benefits of using fiber optic sensor for partial discharge acoustic detection. Acoustic pulses were induced in oil outside the winding and in oil duct inside the winding of a single phase 50 kV transformer. Although both fiber optic sensor and piezoelectric sensor can effectively detect the acoustic pulses outside the winding, fiber optic sensor gained a much better sensitivity over piezoelectric transducer to detect the acoustic pulses originated inside the winding. We envisage that the proposed fiber sensor can be deployed in power transformers to significantly enhance the detection performance of acoustic emission induced by partial discharge.