首页> 外文期刊>Bulletin of the American Physical Society >APS -2017 Annual Meeting of the APS Mid-Atlantic Section- Event - Imaging single nanoparticles using laser terahertz emission microscopy
【24h】

APS -2017 Annual Meeting of the APS Mid-Atlantic Section- Event - Imaging single nanoparticles using laser terahertz emission microscopy

机译:APS -2017 APS大西洋中部年会-活动-使用激光太赫兹发射显微镜对单个纳米粒子成像

获取原文
获取外文期刊封面目录资料

摘要

Laser Terahertz Emission Microscopy (LTEM) is a terahertz imaging method providing an improved imaging resolution, limited by the spot size of the incident laser beam i.e. typically a few extmu m. Inspired by recent results in terahertz nano-spectroscopy, we have improved the resolution of the LTEM technique by three orders of magnitude, by exploiting plasmonic coupling to a metallic Atomic Force Microscope (AFM) tip with a diameter on the order of 20 nm. Our setup is based on a commercial AFM which is coupled to a femtosecond laser (100 fs, 80 MHz repetition rate, 820 nm). The AFM uses an 80 extmu m-long metal probe tip, tapping at 18 kHz with an amplitude of 110 nm. The back-scattered laser light is detected with a photodiode while the forward-scattered terahertz signal is detected with electro-optic sampling in ZnTe. By performing lock-in detection to the tapping frequency of the AFM probe, we can simultaneously record a near-field image at 820 nm, an LTEM image, and an AFM topography image. By locking to a higher harmonic of the tip oscillation the background of scattered light can be suppressed for both the optical and terahertz signals.Our sample is prepared by drop-casting an aqueous solution of surfactant-stabilized gold nanorods onto a wafer of lightly p-doped InAs (N$_{mathrm{c}}$extasciitilde 10$^{mathrm{16}})$ which is known to work well as a THz emitter. We measure a region of this wafer in the vicinity of a single nanorod. We observe that the LTEM image of the nanorod, formed using emission from the underlying substrate, is in excellent agreement with the other more conventional measurements, with an image resolution of extasciitilde 20 nm, limited by the size of the AFM tip. We note that the LTEM signal is highest from the bare InAs wafer and drops when the tip is on top of the gold particle, suggesting that the gold nanoparticle partially screens the emission from the InAs surface. Our measurements clarify the emission mechanism, and the role of the extended metal tip in transducing the THz signal into the far field.
机译:激光太赫兹发射显微镜(LTEM)是一种提供改善的成像分辨率的太赫兹成像方法,受入射激光束的光斑大小(通常为几分之一毫米)的限制。受太赫兹纳米光谱学最新研究结果的启发,我们通过利用等离子体耦合到直径为20 nm的金属原子力显微镜(AFM)尖端,将LTEM技术的分辨率提高了三个数量级。我们的设置基于与飞秒激光器(100 fs,80 MHz重复频率,820 nm)耦合的商用AFM。 AFM使用80 extmu米长的金属探针尖端,以18 kHz的振幅敲击110 nm。反向散射的激光由光电二极管检测,而向前散射的太赫兹信号则由ZnTe中的电光采样检测。通过对AFM探头的敲击频率执行锁定检测,我们可以同时记录820 nm的近场图像,LTEM图像和AFM形貌图像。通过锁定尖端振荡的高次谐波,可以抑制光和太赫兹信号的散射光本底。我们的样品是通过将表面活性剂稳定的金纳米棒的水溶液滴铸到轻度p-掺杂的InAs(N $ _ {mathrm {c}} $ extasciitilde 10 $ ^ {mathrm {16}})$可以作为THz发射器很好地工作。我们测量该晶片在单个纳米棒附近的区域。我们观察到,纳米棒的LTEM图像是使用来自下层基板的发射形成的,与其他更常规的测量结果非常吻合,其图像分辨率为20 nm,受AFM尖端尺寸的限制。我们注意到,来自裸露的InAs晶片的LTEM信号最高,而当尖端位于金颗粒的顶部时LTEM信号下降,这表明金纳米颗粒部分屏蔽了InAs表面的发射。我们的测量阐明了发射机理,以及扩展的金属尖端在将THz信号转换到远场中的作用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号