首页> 外文期刊>The Astrophysical journal >A MASSIVE PROTOSTAR FORMING BY ORDERED COLLAPSE OF A DENSE, MASSIVE CORE
【24h】

A MASSIVE PROTOSTAR FORMING BY ORDERED COLLAPSE OF A DENSE, MASSIVE CORE

机译:由密集密实核的有序塌陷形成的大规模原恒星

获取原文
获取外文期刊封面目录资料

摘要

We present 30 and 40 μm imaging of the massive protostar G35.20–0.74 with SOFIA-FORCAST. The high surface density of the natal core around the protostar leads to high extinction, even at these relatively long wavelengths, causing the observed flux to be dominated by that emerging from the near-facing outflow cavity. However, emission from the far-facing cavity is still clearly detected. We combine these results with fluxes from the near-infrared to mm to construct a spectral energy distribution (SED). For isotropic emission the bolometric luminosity would be 3.3 × 104 L ☉. We perform radiative transfer modeling of a protostar forming by ordered, symmetric collapse from a massive core bounded by a clump with high-mass surface density, Σcl. To fit the SED requires protostellar masses ~20-34 M ☉ depending on the outflow cavity opening angle (35°-50°), and Σcl ~ 0.4-1 g cm–2. After accounting for the foreground extinction and the flashlight effect, the true bolometric luminosity is ~(0.7-2.2) × 105 L ☉. One of these models also has excellent agreement with the observed intensity profiles along the outflow axis at 10, 18, 31, and 37 μm. Overall our results support a model of massive star formation involving the relatively ordered, symmetric collapse of a massive, dense core and the launching bipolar outflows that clear low-density cavities. Thus a unified model may apply for the formation of both low- and high-mass stars.
机译:我们用SOFIA-FORCAST展示了巨大的原恒星G35.20–0.74的30和40μm成像。即使在相对较长的波长下,原恒星周围的新生核的高表面密度也导致其高度消光,导致观测到的通量被从面向近处的流出腔中出来的通量所控制。但是,仍然可以清楚地检测到从面向腔发出的辐射。我们将这些结果与从近红外到mm的通量相结合,以构建光谱能量分布(SED)。对于各向同性发射,辐射热亮度为3.3×104 L☉。我们对由具有高质量表面密度Σcl的团块界定的块状核有序,对称坍塌的原恒星形成进行辐射转移建模。要安装SED,需要的原星质量约为20-34 M☉,具体取决于流出腔的张开角度(35°-50°)和Σcl〜0.4-1 g cm–2。考虑到前景消光和手电筒效应后,真实的辐射热亮度为〜(0.7-2.2)×105 L☉。这些模型之一也与沿流出轴在10、18、31和37μm处观察到的强度分布具有极好的一致性。总的来说,我们的结果支持大规模恒星形成的模型,该模型包括相对较大的密集密实核的相对有序对称对称坍塌以及清除低密度腔的双极流出。因此,统一模型可以适用于低质量和高质量恒星的形成。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号