...
首页> 外文期刊>Digest Journal of Nanomaterials and Biostructures >STUDY OF STRUCTURAL AND MAGNETIC PROPERTIES OF Co1-xZnxCr0.5Fe1.5O4 FERRITE THIN FILM BY PLD TECHNIQUE
【24h】

STUDY OF STRUCTURAL AND MAGNETIC PROPERTIES OF Co1-xZnxCr0.5Fe1.5O4 FERRITE THIN FILM BY PLD TECHNIQUE

机译:Co1-xZnxCr0.5Fe1.5O4铁氧体薄膜的结构和磁性能的PLD研究

获取原文

摘要

The Zinc doped cobalt chromium ferrites with the general formula Co1-xZn xCr0.5Fe1.5O4 are used to deposit the thin films on silicon Si (100) substrate using pulsed laser deposition technique keeping the substrate temperature constant at 450oC. The pressure inside the chamber was 10-4Torr. After deposition these thin films have been post annealed at 800C0 to achieve the crystallinity. The structural properties, surface analysis, magnetic and optical properties have been analyzed by X-ray Diffractrometer, Atomic Force Microscopy, Spectroscopy Ellipsometry and Vibrating Sample Magnetometer respectively. XRD analysis revealed that lattice parameters decreases from 8.796 A0 to 8.705 A0 and crystallite size increases from 19 nm to 68nm with increasing the zinc contents. AFM analysis showed that average roughness increases with enhancement of zinc which may be due to increasing grain size and thickness. The ellipsometric analysis revealed that the band gap energy increases from 1.91 eV to 3.0 eV.
机译:通式为Co1-xZn xCr0.5Fe1.5O4的掺锌钴铬铁氧体用于通过脉冲激光沉积技术在硅Si(100)衬底上沉积薄膜,以保持衬底温度恒定在450oC。室内的压力为10-4Torr。沉积后,将这些薄膜在800℃下进行后退火,以实现结晶度。通过X射线衍射仪,原子力显微镜,椭圆偏振光谱仪和振动样品磁强计分别分析了结构性能,表面分析,磁学和光学性能。 XRD分析表明,随着锌含量的增加,晶格参数从8.796 A0降低到8.705 A0,微晶尺寸从19 nm增加到68nm。 AFM分析表明,平均粗糙度随锌的增加而增加,这可能是由于晶粒尺寸和厚度的增加。椭偏分析表明,带隙能量从1.91 eV增加到3.0 eV。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号