...
首页> 外文期刊>Construction and Building Materials >Strengthening Of Rc T-section Beams With Low Strength Concrete Using Cfrp Composites Subjected To Cyclic Load
【24h】

Strengthening Of Rc T-section Beams With Low Strength Concrete Using Cfrp Composites Subjected To Cyclic Load

机译:循环荷载下Cfrp复合材料加固低强度混凝土RC T型梁

获取原文
获取原文并翻译 | 示例
           

摘要

Various methods are developed for strengthening reinforced concrete beams against shear. Nowadays, external bonding of different composite members to RC beams was very popular and successful technique internationally. This study presents test results on strengthening of shear deficient RC beams by external bonding of carbon fiber reinforced polymer (CFRP) straps. Six RC beams with a T-section were tested under cyclic loading in the experimental program. Width of the CFRP straps, arrangements of straps along the shear span, and anchorage techniques that were applied at the ends of straps were the main parameters that were investigated during experimental study. Shear deficient beams with low strength concrete were strengthened by using CFRP straps for obtaining ductile flexural behavior. The test results confirmed that all CFRP arrangements improved the strength, stiffness and energy dissipation capacity of the specimens significantly. The failure mode and ductility of specimens were proved to differ according to the CFRP strap width and arrangement along the beam. Experimental results were compared with the analytical approaches that were suggested by ACI-440 Committee Report.
机译:开发了各种方法来增强钢筋混凝土梁的抗剪强度。如今,在国际范围内,将不同的复合构件与RC梁进行外部粘结已成为非常流行和成功的技术。这项研究提出了通过碳纤维增强聚合物(CFRP)带的外部粘结来增强抗剪RC梁的测试结果。在实验程序中,在循环载荷下测试了六个T形截面的RC梁。 CFRP带的宽度,沿剪切跨度排列的带以及在带末端应用的锚固技术是实验研究期间研究的主要参数。通过使用CFRP绑带来加固低强度混凝土的抗剪梁,以获得延性的挠曲性能。测试结果证实,所有CFRP布置均可显着提高样品的强度,刚度和能量耗散能力。事实证明,根据CFRP带的宽度和沿梁的排列,试样的破坏模式和延展性会有所不同。将实验结果与ACI-440委员会报告建议的分析方法进行了比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号