Use of recycled FRP reinforcing bar in concrete as coarse aggregate and its impact on the mechanical properties of concrete

摘要

The production of fiber reinforced polymer (FRP) composite materials is a major source of non-degradable waste. The use of FRP bars for reinforcing concrete is increasing in construction. This study investigates the impact of replacing coarse natural aggregate (NA) in concrete with cut FRP bar waste (FRP-RA) on the compressive and tensile strength of both high strength and normal strength concretes. Concrete cylinders without any FRP-RA, with 40% of NA (the large-grade particles) replaced with FR-PRA, and with 100% of NA replaced with equivalently graded FRP-RA were tested. The results show that the effect of the FRP-RA on the mentioned mechanical properties depends on the concrete strength, replacement ratio and the gradation-size of the NAs replaced. High-strength concrete performed better than low strength concrete and replacement of larger sized NA with FRP-RA resulted in better performance compared to full replacement. The test results show that existing empirical models can sometimes overestimate the tensile strength of lower-strength FRP-RA concretes. The findings show that although the use of FRP waste in concrete reduces the strength, concrete with structural grade mechanical properties can be produced with FRP-RA. The potential durability issues of FRP-RA concrete are discussed and future studies on this topic is proposed. (C) 2016 Elsevier Ltd. All rights reserved.